Idiomas disponibles
Idiomas disponibles
5 | Operating Instructions
5.5
Using the remote control
4
3
2
1
25
24
23
22
21
20
19
Fig. 24 Remote control overview
Display icons
Information
1 Turbo function
-
display
2 Fan speed dis-
Low / Medium / High / Auto
play
3 Temperature
Shows the setpoint temperature or the in-
display
door temperature. Units in °C or °F.
4 Data Transmis-
Symbols shows up briefly when the re-
sion
mote control transmits data to the A/C
unit.
5 Mode display
COOL / FAN / DRY / HEAT / AUTO
6 Battery display
-
7 Timer ON / OFF
-
status indicator
8 Clock / Timer
Real time clock, Time of timer during
display
setup.
9 Eco display
ECO 1 / ECO2
10 Sleep function
-
display
11 Lock function
-
display
12 / 154
Operating but-
tons
12 LOCK
5
13 ON / OFF
6
14 FAN
7
8
9
10
11
15 MODE
12
16 SLEEP
17 ECO
13
18 SET TIME
14
19 HOUR/MIN
20 TIMER
15
21 DISPLAY
16
22 Down
23 TURBO
17
18
24 Up
25 °C/°F
5.6
Switching the unit ON / OFF
To switch the unit on, press the
trol.
Fig. 25 Switching the unit on
l The unit switches on and the display of the air distributor
shows the set temperature and operation mode.
l The display of the remote control shows the set temperat-
ure, operation mode and fan speed level.
l The last settings are retrieved.
l The indoor fan may start immediately if the unit is in fan or
cool mode. If in heating mode there will be a delay while
the inside coil heats up before the inside fan turns on - pre-
venting a cold draft.
l It may take up to 3 minutes for the compressor to start op-
eration. This is a feature to protect the compressor.
To switch the unit off, press the
Function
Disables the touch control on the air dis-
tributor when the unit is ON. Press the
button again to unlock.
Switches the system On / Off.
Selects Low / Medium / High or AUTO fan
speed. AUTO fan speed is only possible in
COOL / HEAT mode. With AUTO fan
speed the fan automatically adjusts
between Low, Medium and High.
Selects the operation mode COOL / DRY /
FAN / HEAT / AUTO.
Selects the sleep mode. Only available in
COOL, HEAT or AUTO mode.
Select the eco mode ECO1 / ECO2. Only
available in COOL or HEAT mode.
Enters CLOCK / TIMER setting mode.
Changes between hour or minutes set-
tings.
Activates different timer settings.
Switches the display of the air distributor
On / Off.
Adjusts the setpoint temperature, clock or
timer.
Selects theTURBO mode. Only available in
COOL or HEAT mode.
Adjusts the setpoint temperature, clock or
timer.
Selects the temperature units, Celsius or
Fahrenheit, of the temperature display.
button on the remote con-
button again.
9044618A_OI-II_Cool Top Trail 36V
