Idiomas disponibles
Idiomas disponibles
• The 12 V LFP mode is only suitable for 12 V lithium iron phosphate batteries, not
for other lithium batteries. Charging other lithium batteries or lead batteries in
this mode is prohibited.
• For lead-acid batteries whose battery voltage is lower than 3 V for an extended
period, it is advisable to replace the battery if this charger is unable to increase
the voltage.
triangle WARNING
• Always compare the battery voltage and the battery type with the set charging
mode.
• Do not charge any 24 V lead batteries.
• Explosive gases can form when lead batteries are charged. Please ensure suf-
ficient ventilation, and avoid fire, naked flames and smoking. Because explosive
gases can form, it is important to ensure that the pole terminals are only discon-
nected when the charger is unplugged!
• Battery acid is corrosive. If battery acid gets into your eyes or onto your hands,
rinse them immediately with a lot of water and see a doctor.
• Ensure that the pole terminals are connected with the correct polarity (red pole
terminal to the positive pole; black pole terminal to the negative pole).
• Prevent the pole terminals from touching one another when the mains plug is
plugged in because this could result in an electric arc due to a short circuit.
triangleSAFETY PRECAUTIONS
• If you are working near a lead-acid battery, there should be someone within ear-
shot or nearby who can come to your aid.
• Have plenty of fresh water and soap ready in case battery acid comes into con-
tact with your skin, clothing or eyes.
• Wear full eye protection and protective clothing. Avoid touching your eyes when
you are working near the battery.
• If battery acid comes into contact with your skin or clothing, wash it off immedi-
ately with soap and water. If acid gets into your eyes, rinse your eyes out imme-
diately for at least 10 minutes with cold running water and see a doctor immedi-
ately.
• Take off personal items made of metal, such as rings, bracelets, necklaces and
watches, when you are working with a lead-acid battery. A lead-acid battery
can create a short-circuit current that is high enough to weld a ring or similar to
metal, which can lead to serious burns.
1. TECHNICAL DATA
Input voltage:
Protection class:
Protection type:
End-of-charge voltage:
Configurable charging currents:
Battery capacity (charging):
Battery capacity (maintenance charging):
Ambient temperatures:
circle-c NOTE:
No electric vehicles with a built-in battery can be charged with the vehicle battery charger.
circle-c NOTE:
No jump-starting of 6 V or 12 V batteries is possible.
DE
|
EN
| FR | ES | PT | SE | IT | NL | DK | FI | NO | PL
220-240V AC / 50Hz
II
IP65
6 V STD: 7.2 V
12 V STD & 12 V M: 14.4 V
12 V AGM/C: 14.8 V
12 V LFP: 14.6 V / RECOND: 16.5 V
6 A (12 V STD, AGM/C, LFP)
2 A (6 V STD)
1.5 A (RECOND)
1 A (12 V M)
20 Ah – 150 Ah (6 A)
7 Ah - 150 Ah (2 A)
5 Ah - 150 Ah (1.5 A)
4 Ah - 150 Ah (1 A)
4 Ah – 200 Ah
-20°C - +40°C
11
