Idiomas disponibles
Idiomas disponibles
5.
Disconnect the power cord and close the charge port
cover when charge is complete.
9
Start the Unit
WARNING
•
If you do not understand how a specific control
functions, or have not yet thoroughly read the Features
and Controls section, do so now.
•
Do NOT attempt to operate the rider without first
becoming familiar with the location and function of all
controls.
1.
Make sure that:
•
The operator is sitting in the operator seat, and
•
The parking brake is engaged and locked, and
•
The ground speed control levers are locked in the
START / PARK position.
See also Safety Interlock System Checks and Display /
Control Console.
2.
Insert the key (B, Figure 10) into the key switch (A).
10
3.
Turn the key to the ON position. The display / control
console (C, Figure 10) will power up. See Display /
Control Console. An audible alarm will sound to indicate
that the unit is ready to operate.
In the event of an emergency, bring the unit to a stop,
turn the unit off, and remove the key. See Stop the
Unit.
10
Stop the Unit
1.
Move the ground speed levers to the middle (or neutral
'N') position to stop rider movement. Move the levers
outward to lock them in the START / PARK position.
2.
Engage and lock the parking brake. See Parking Brake
Operation.
3.
Disengage the mower blades (if engaged) by pushing
down on the PTO switch.
4.
Turn the key switch to the OFF position and remove the
key.
After the key switch is turned off, the display console will
indicate that the unit is powering down. This may take a
moment.
Display / Control Console
The display / control console powers up when you start the
unit. See Start the Unit.
NOTE: Display screens may differ from those shown.
Drive Screen - Main (Figure 11)
Main drive screen shown during normal operation.
ferrismowers.com
