cecotec POWER ESPRESSO 20 STEEL PRO Manual De Instrucciones página 52

ENGLISH
If you press the steam button
and do not let the preheating
process finish.
If the steam function starts
Less steam when the machine is cold.
Turn the steam regulator knob
to the maximum position.
No whole milk is used.
Low milk
If cold milk is not used.
froth
The steam nozzle is too deep in
the milk.
The coffee powder is too
coarse.
The ground coffee is not
Less fat
compact enough.
Prepare the coffee just after
frothing the milk.
Prepare the coffee just after
frothing the milk.
Too much
coffee in the
Wipe excess coffee from the
funnel
edge of the funnel after filling it
with ground coffee.
52
Press the steam button and wait until
the indicator light changes from flashing
to steady on.
Activate the double-cup brewing
function or wait for the preheating to
finish in steam mode before frothing the
milk.
Slowly turn the steam knob until steam
comes out when frothing the milk. Adjust
the amount of steam slowly after a few
seconds, according to your preference.
Use whole milk.
Place the milk in the refrigerator at 2-5
ºC.
Immerse the steam nozzle into the
surface of the milk to a depth of 1 cm.
Change the coffee powder.
Tamp it down with adequate pressure.
Make sure that the machine is
completely cool before use.
Make sure that the machine is
completely cool before use.
Clean excess coffee from the edge of the
funnel with a brush or by hand.