If the safety timer disconnects before -dV, the top-off charge will not be
engaged. The charger will then go directly to trickle charge mode and the
LED will turn green. If the battery voltage is far below normal, the charger
will stop the fast charge current and switch to trickle charge mode. The
LED will then indicate an "error" by flickering green and red. The battery
packs and/or the charger may need to be replaced.
If the line power is turned off, the charger will reset and start a new
charge cycle when it is turned on again.
6.2. Cleaning
Disconnect the instrument from any source of electricity.
Use a soft cloth lightly moistened with soapy water
Wipe with a moist cloth and then dry with a dry cloth
Never use alcohol, solvents or hydrocarbons
45