Idiomas disponibles
Idiomas disponibles
3.3.9. Restoring factory defaults
The factory default settings are shown in the following table:
Parameter
Test mode
Test Type
Filter
Storage mode
Language
Nameplate
Nameplate values
To set the instrument back to the factory default configuration:
1. Turn the TR8703 OFF
2. Press and hold the ▲ key
3. Turn the TR8703 ON
4. Release the ▲ key when the instrument beeps
NOTE: The previously stored Measurement Records will remain in
the memory and the language will remain the same as before the
default configuration was loaded.
Default Value
Ratio
VT/PT
Normal
Manual
English
Disable
19920:7200
19920:4800
19920:2400
19920:2160
19920:120
7200:2400
7200:2160
7200:120
2400:120
2160:120
28
