Idiomas disponibles
Idiomas disponibles
TO WASH AND RINSE CONTAINER
1. REMOVE CONTAINER FROM MOTOR BASE. Remove
lid. Rinse container interior and lid under running water.
Add washing solution to container.
Scrub and flush out the container interior and lid to
dislodge and remove as much food residue as
possible. Empty container.
2. Wipe down exterior of container with a soft cloth or sponge
dampened with washing solution. Wash lid
and lid insert in fresh washing solution. Fill container one-
quarter full with fresh washing solution, cover
(with lid only), place on motor base and run on HI
speed for two (2) minutes. Empty container.
3. Repeat step 2 using clean rinse water in place of washing
solution.
NOTE: IN ORDER TO MINIMIZE POSSIBILITY OF SCALDING,
TEMPERATURE OF WASHING SOLUTION AND RINSE WATER
MUST NOT EXCEED 115˚F (46˚C), AND QUANTITY USED MUST NOT
EXCEED ONE-QUARTER CONTAINER FULL.
TO SANITIZE AND DRY CONTAINER
1. Wipe down exterior of container with a soft cloth or sponge
dampened with sanitizing solution.
2. Fill container with sanitizing solution, cover, place on
motor base, and run on HI speed for one (1) minute. Empty
container. Dislodge any residual moisture from blade
assembly by placing empty container on motor base and
running on HI speed for two (2) seconds.
3. Sanitize lid and lid insert by immersing in sanitizing solution
for two (2) minutes.
4. Do not rinse container, lid, or lid insert after sanitizing
is completed. Allow parts to air-dry.
TO CLEAN AND SANITIZE MOTOR BASE
1. UNPLUG POWER CORD. Wipe down exterior surfaces of
motor base with a soft cloth or sponge dampened with
washing solution, rinse water, and sanitizing solution.
Prevent liquid from running into motor base by wringing all
excess moisture from the cloth or sponge before using it.
IMPORTANT
7
