Idiomas disponibles
Idiomas disponibles
'El
Trouble-shooting guide
_
Buzzing noise on AM, usually conspicu-
ous at night or with a weak station.
High pitch noise.
Crackling noise on AM and FM.
AM stations cannot be received.
Tuned indicator lights but sound is dis-
torted and separation is bad.
Tuned indicator flickers and/or a hiss is
heard.
No station or undesired station is recalled
when a Preset button is pressed.
® Noise from electrical apparatus such
as fluorescent lamps.
® Noise from TV.
® Noise caused by turning fluorescent
lamp on and off.
® Noise from automobile ignition.
®@ AM loop antenna is not attached.
® Multiple reflection of the radio waves
because of tall buildings or mountains.
® The station is too weak.
® Stereo FM broadcasts cover only about
half the distance of ordinary broadcasts.
© The Power switch has not been turned
on for a long time, or the power cord
has been unplugged for a long time.
® Move set to different location.
® Change the position or direction of the loop an-
tenna.
®@ Keep unit away from TV set.
® Move the antenna as far away as possible from
the fiuorescent lamp.
© Install an outdoor FM antenna as far away as
possible from the road.
© Connect the included AM loop antenna to the
AM antenna terminals.
® Use an antenna which has better directivity and
select a point where the distortion is least.
® Install outdoor FM antenna.
® Change the position or direction of the AM loop
antenna.
® Switch to mono reception. (Even stereo broad-
casts will be heard in mono.)
® The memory contents are lost if the power is not
turned on and off a few times each month. Store
all stations in the memory again and remember
to turn power on and off a few times each month.
Specifications
FM
Tuning Range:
European mod
87.5
AM:
els:
— 108.0MHz
(50kHz steps)
Canadian mod els:
Tuning Range:
European models: 522—1611kHz
(9kHz steps)
Canadian models: 530—1710kHz
(10kHz steps)
Saudi Arabia &
Worldwide models: 531—1602kHz
(9kHz steps)
87.9 — 107.9MHz
Usable Sensitivity:
25ynV
(200kHz steps)
Image Rejection Ratio:
40dB
Saudi Arabia & Worldwide models:
IF Rejection Ratio:
40dB
87.5 — 108.0 MHz
Signal-to- Noise Ratio:
40dB
(50kHz steps)
Total Harmonic Distortion:
0.8%
Usable Sensitivity:
Mono:
11.2dBf, 1.0pV, IHF
Output Voltage:
150mV
0.9unV 75 ohms DIN
Stereo:
2.0uV 75 ohms
General
50dB Quieting Sensitivity.
Mono:
1.7unV 75 ohms
Power Supply:
European models: AC 230V, 50Hz
Stereo:
17yV 75 ohms
Canadian models: AC 120V, 60Hz
Capture Ratio:
1.5dB
British & Australian models: AC 240V, 50Hz
Image Rejection Ratio:
80dB
Worldwidemodels:
120 and 220V switchable,
IF Rejection Ratio:
90dB
50/60Hz
Signal-to-Noise Ratio:
Mono:
73dB
Dimensions (W x H x D): 455 x 75.5 x 306 mm
Stereo:
66dB
(17-15/16"
x 2-15/16"
x 12-1/16")
Selectivity:
55 dB DIN (+300kHz, 40kHz dev.)
Weight:
3.4 kg, 7.5 Ibs.
AM Suppression Ratio:
50dB
Total Harmonic Distortion:
Mono:
0.1%
Stereo:
0.2%
Frequency Response:
Stereo Separation:
Output Voltage:
Muting Level:
30 — 15,000Hz +1.5dB
40dB at 1kHz
30dB at 70-10,000Hz
0.75V
2uV, 75 ohms
Specifications and features are subject to change without notice,
