Introduction; Intended Use; Specifications; Mattress Specifications - Stryker EPIC II 2031 Manual Del Usuario

Cama de cuidados críticos
Tabla de contenido

Intended Use

This manual is designed to assist you with the operation of the Model 2031 Epic II
before using the equipment.

Specifications

Safe Working Load
Note: Safe Working Load indicates the sum of the
patient, mattress, and accessory weight.
Bed Weight
Overall Length/Width
Minimum Bed Height
Maximum Bed Height (Standard)
Maximum Bed Height (Enhanced)
Fluoroscopy Access
Knee Gatch Angle
Back Angle
Trendelenburg/Reverse Trendelenburg
Electrical Requirements
Battery Voltage
Noise Level
Duty Cycle

Mattress Specifications

Thickness
Width
Length
ILD
The above stated mattress specifications assist in ensuring the product conforms to HBSW and IEC
specifications.
Stryker reserves the right to change specifications without notice.
Specifications listed are approximate and may vary slightly from unit to unit or by power supply fluctuations.
www.stryker.com

Introduction

Length
91"
Width
42.5"
18"
30" to 31"
32" to 33"
Epic II®
17"
0° to 30°
0° to 90°
-12° to +12° ±2°
230 VAC, 50/60 Hz, 7.0 A
(1) 9V (Alkaline Battery) - Nurse Call Option
< 65 dB
3 minutes ON / 30 minutes OFF
(Continuous with Intermittent Loading)
6"
>= 35"
>= 84"
80 lbs
2031-009-011 REV B
®
Critical Care Bed. Read it thoroughly
500 lbs
227 kg
594 lbs
269 kg
231 cm
108 cm
46 cm
76.2 cm to 78.7 cm.
81.2 cm to 83.8 cm.
43.1 cm
15.2 cm
>= 88.9 cm
>= 213.4
36.3 kg
Return To Table of Contents
2-9

Capítulos

Tabla de contenido
loading

Tabla de contenido