Idiomas disponibles
Idiomas disponibles
Excessive
Weight
Hazard
Use two or more people to move and install
refrigerator. Failure to do so can result in back or
other injury.
UNPACKING
YOUR REFRIGERATOR
Remove
tape and any temporary
labels from your
refrigerator
before using. Do not remove any
warning-type
labels, the model and serial number
label, or the Tech Sheet that is located under the
front of the refrigerator,
behind the base cover.
To remove any remaining
tape or glue, rub the area
briskly with your thumb. Tape or glue residue
can
also be easily removed
by rubbing a small amount
of
liquid dish soap over the adhesive
with your fingers.
Wipe with warm water and dry.
Do not use sharp instruments,
rubbing alcohol,
flammable
fluids, or abrasive
cleaners
to remove
tape or glue. These products
can damage
the
surface
of your refrigerator.
For more information,
see the Important
Safety
Instructions
section.
Refrigerator
shelves
are installed
in the shipping
position.
Please reinstall
shelves
according
to your individual
storage
needs.
When
Moving
Your Refrigerator:
Your refrigerator
is heavy. When
moving the
refrigerator
for cleaning
or service,
be sure to
protect the floor. Always
pull the refrigerator
straight
out when moving it. Do not wiggle or
walk the refrigerator
when trying to move it, as
floor damage
could occur.
Explosion
Hazard
Keep flammable
materials
and vapors,
such as
gasoline,
away from refrigerator.
Failure to do so can result in death, explosion,
or
fire.
•To reduce the risk of electric shock, do not install
the refrigerator
in a wet or damp area.
• Select a place where a water supply can be easily
connected
for the automatic
icemaker.
& CAUTION:
Avoid placing
the unit near heat
sources,
direct sunlight
or moisture.
9
