Idiomas disponibles
Idiomas disponibles
HOW TO REPLACE
DOOR HANDLES
NOTE:
Handle appearance
may vary from
illustrations
on this page.
1. Replacing
Refrigerator
Door Handle
• Place the handle on the door, fitting it over the
mounting
fasteners
and tighten the set screws with a
3/32" (2.5ram)
Allen wrench.
NOTE:
If the handle mounting
fasteners
need to be
tightened
or removed
use a 1/4" (6.4mm)
Allen
wrench.
Mounting
Fasteners
2. Replacing
Freezer
Drawer
Handle
• Place the handle on the door, fitting it over the
mounting
fasteners
and tighten the set screws on the
bottom of the handle with a 1/8" (3.1ram)
Allen
wrench.
NOTE:
If the handle mounting
fasteners
need to be
tightened
or removed
use a 1/4" (6.4mm)
Alien
wrench.
When the customer takes apart the handle or
assemble
it from a refrigerator,
please be cautious of
following things.
• Hold the handle with your own hand to make sure
not to drop the handle to the floor or instep while
taking apart the handle from a refrigerator.
• Do not swing the handle towards people or animals
after taking apart the handle.
• Insert the bracket hole of the handle into the stopper
bolt of the door exactly, and then assemble
the set
screws to fix the handle.
• Check if there's any gap between the door and
handle after fixing the handle.
12
