Idiomas disponibles
Idiomas disponibles
LEVELING
AND DOOR ALIGNMENT
Leveling
After installing, secure the stability
of the product
with the leveling
legs.
Your refrigerator
has two front leveling
legs--one
on
the right and one on the left. Adjust
legs to alter tilt
from front-to-back
or side-to-side.
If your refrigerator
seems unsteady
or you want the doors to close
easier, adjust the refrigerator's
tilt using the
instructions below:
1. Plug the refrigerator's
power cord into a 3-prong
grounded
outlet.
Move the refrigerator
into its final
position.
Remove
the base cover.
To remove
the base cover
1) Open the Freezer
Drawer. (Drawer
not shown
for clarity.)
2) Once the drawer
is open and there is sufficient
clearance,
remove screws on the top of the
cover.
To replace
base cover:
_::_
. Place cover into position
and insert and tighten
the screws.
_
%_",
2. Turn the leveling
leg clockwise
to raise that side of
the refrigerator
or counterclockwise
to lower it.
It may take several turns of the leveling
leg to
adjust the tilt of the refrigerator.
NOTE:
Having someone
push backward
against
the top of the refrigerator
takes some weight off
the leveling
legs. This makes
it easier to adjust the
legs.
Level the refrigerator by using an 11/16 inch (18ram) wrench
or a flat blade screwdriver, Turn the leveling legs
counterclockwise
to raise or clockwise to lower the height of
the front of the refrigerator,
NOTE: The front of the refrigerator should be slightly higher
than the back.
,
w
5.
Open both doors again and check to make sure
that they close easily. If not, tilt the refrigerator
slightly
more to the rear by turning
both leveling
legs clockwise.
It may take several
more turns,
and you should turn both leveling
legs the same
amount.
Re-adjust
if necessary.
Replace
the base cover.
NOTE:
Your new refrigerator
is uniquely
designed
with two fresh food doors. Either door can be
opened
or closed
independently
of one another.
You may have to exert slight pressure
on doors to
get them to close completely.
Door Alignment
Both the left and right refrigerator
doors have
an adjustable
nut, located on the bottom
hinge,
to raise and lower them to align properly.
If the space between
your doors is uneven,
follow the instructions below to align the doors
evenly:
Use the wrench
(included
with the Owner's
Manual)
to turn the nut in the door hinge to
adjust the height. To the right to raise or to the
left to lower the height.
17
