Goodyear GY 5020AG Manual De Instrucciones página 40

English
Owner´s manual
•
Installing wire cup brush
Optional accessory
WARNING: Do not use brush that is
damaged, or which is out of balance. Use of
damaged brush could increase potential for
injury from contact with broken brush wires.
Remove the battery cartridge from the tool
and place it upside down allowing easy access
to spindle. Remove any accessories on spindle.
Thread wire cup brush onto spindle and tighten
with supplied wrench.
1. Wire cup brush
Installing wire wheel brush
Optional accessory
WARNING: Do not use wire wheel brush that is damaged, or which is out of balance. Use of damaged
wire wheel brush could increase potential for injury from contact with broken wires.
WARNING: ALWAYS use guard with wire wheel brushes, assuring diameter of wheel fits inside guard.
Wheel can shatter during use and guard helps to reduce chances of personal injury.
Remove the battery cartridge from the tool and
place it upside down allowing easy access to
spindle.
Remove any accessories on spindle. Thread wire
wheel brush onto spindle and tighten with the
wrenches.
1. Wire wheel brush
5. OPERATION
CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before
adjusting or checking function on the tool.
Installing or removing battery cartridge
CAUTION: Always switch off the tool before installing or removing of the battery cartridge.
CAUTION: Hold the tool and the battery cartridge firmly when installing or removing battery
cartridge. Failure to hold the tool and the battery cartridge firmly may cause them to slip off your hands
and result in damage to the tool and battery cartridge and a personal injury.
40
1
1