Goodyear GY 5020AG Manual De Instrucciones página 34

English
Owner´s manual
•
14. Pay attention that the wheel continues to rotate after the tool is switched off.
15. If working place is extremely hot and humid, or badly polluted by conductive dust, use a short-circuit
breaker (30 mA) to assure operator safety.
16. Do not use the tool on any materials containing asbestos.
17. When use cut-off wheel, always work with the dust collecting wheel guard required by domestic
regulation.
18. Cutting discs must not be subjected to any lateral pressure.
19. Do not use cloth work gloves during operation. Fibers from cloth gloves may enter the tool, which
causes tool breakage.
4. ASSEMBLY
WARNING: Do not use this product if any parts on the packing list are already assembled to your
product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and
require customer installation. Use of a product that may have been improperly assembled could result in
serious personal injury.
WARNING: If any parts are damaged or missing do not operate this product until the parts are
replaced. Use of this product with damaged or missing parts could result in serious personal injury.
WARNING: Do not attempt to modify this product or create accessories not recommended for use
with this product. Any such alteration or modification is misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING: Do not connect to power supply until assembly is complete. Failure to comply could
result in accidental starting and possible serious personal injury.
WARNING: Before assembly, make sure that
the tool is switched off and the battery has been
removed.
Installing side grip (handle)
Screw the side grip securely on the position of the
tool as shown in the figure.
34