Goodyear GY 5020AG Manual De Instrucciones página 28

English
Owner´s manual
•
2. GRAPHIC WARNINGS
Wear eye and ear protection!
Warning! - Caution!
Read operation instructions before use.
Do not expose this electric power tool to rain.
Attention: Environmental Protection! This device may not be disposed of with general/ household waste.
Dispose of only at a designated collection point.
Remove rechargeable battery before repair and maintenance work!
3. SAFETY INSTRUCTIONS
ATTENTION! Read all instructions contained herein. Failure to observe the following instructions
may result in electric shock, burns and/or severe injury. The term 'power tool' used in the following
includes both main-operated tools (with main supply) and battery-operated tools (without main supply).
1. Keep your working area clean and tidy.Untidy and poorly lit working areas may lead to accidents.
2. Do not operate the tool in potentially explosive environments containing combustible fluids, gases or
dusts. Power tools generate sparks that may ignite dusts or fumes.
3. Keep children and other persons away when you are operating the power tool.Distractions may result
in the operator loosing control over the tool.
4. Keep the tool out of the rain. The penetration of water into a power tool increases the risk of electric
shock.
Personal safety
1. Always pay attention to what you do and apply reasonable care when working with a power
tool. Do not use the tool when you are tired or under the influence of medication, drugs or
alcohol. When working with power tools even a short moment of inattentiveness may result in
severe injury.
2. Wear personal protection equipment and always wear eye protection (safety goggles). Wearing
personal protection equipment as a dust mask, nonslip safety shoes, safety helmet and ear protectors
reduces the risk of injury.
3. Avoid unintentional operation. Make sure that the switch is in 'OFF' position before pulling out
the battery. When carrying the tool with your finger on the on/off switch or connecting the battery
with the switch in 'ON' position, may result in accidents.
28