Idiomas disponibles
Idiomas disponibles
Reinstalling
the Refrigerator
Door
m,-Left Door
1. Lower the door onto the middle hinge pin (10).
2. Fit the top hinge (7) over the hinge lever latch (8) and into
place. Rotatethe lever (6) clockwiseto securethe hinge.
3. install the grounding
screw
(5) and connect
the two
wire harnesses
(4).
4. Push the water supply tube into the hole on the top
case and pull it out on the backplate.
5. Insert the water supply tube (3) into the connector
tube until you see only one scale mark. (Fully insert
the tube over 5/8" (15 ram)).
6. Hook tab on door switch side of cover (2) under
edge of wire opening
in cabinet top. Position cover
into place. Insert and tighten
cover screw (1).
(2)
11)
(3).
(7)j
(8)
Right Door
1. Lower the door onto the middle hinge pin (9).
2. Fit the top hinge (4) over the hinge lever latch (5) and into
place. Rotate the lever (3) counterclockwise
to secure
hinge.
3. Hook tab on the switch side of corner under the edge of
wire opening
in cabinet
top. Position cover (2) into
place. Insert and tighten
the cover screw
(1).
(1)__/(2)
___(3)(4)
(10)
_(9)
CAUTION
Collet
Tube
Insert Line
Clip --
After inserting,
pull the tube to
make sure that it is secure
and reinsert the clip.
14
