Idiomas disponibles
Idiomas disponibles
REMOVING
AND REPLACING
REFRIGERATOR
DOORS
To remove
the left refrigerator
door:
On the back of the refrigerator,
press back on the
release
ring of the fitting (see 3 in figure below) and
pull out the water tube in the direction
of the arrow.
6. Rotate
hinge lever (6) counterclockwise.
Lift the
top hinge (7) free of the hinge lever latch (8).
• , CAUTION:
When
lifting the hinge free of the latch,
be careful that the door does not fall forward.
7. Lift the door from the middle
hinge pin and remove
the door.
8. Place the door, inside facing up, on a
nonscratching
surface.
CAUTION:
Before you begin, remove food and
bins from the doors.
(3).
/
(7)J
/
(8)
1. Open the door.
Remove
the top hinge cover screw (1).
2. Use a flat-head
screwdriver
to pry back the hooks
(not shown) on the front underside
of the cover
(2). Lift up the cover.
3. Remove
the cover. Pull out the tube (3).
4. Disconnect
all the wire harnesses
(4).
5. Remove
the grounding
screw(5).
To remove
the right
refrigerator
door:
(1)_
(2)
)
1. Open the door. Remove
the top hinge cover
screw (1). Lift up the cover (2).
2. Remove the cover.
3. Rotate the hinge lever (3) clockwise.
Lift the top
hinge (4) free of the hinge lever latch (5).
A CAUTION:
When
lifting the hinge free of the latch,
be careful that the door does not fall forward.
Electrical
Shock
Hazard
• Disconnect
electrical
supply to the refrigerator
before installing. Failure to do so could result in
death or serious
injury.
, Do not put hands or feet or other objects
into the
air vents, base cover, or bottom of the
refrigerator.
You may be injured or receive an
electrical
shock.
o Be careful when you work with the hinge, base
cover, and stopper.
You may be injured.
13
