Idiomas disponibles
Idiomas disponibles
Preparing
the Food Processor for Use
Multipurpose
Blade
and
Dough
Blade
Assembly
Place the blade on the power shaft.
Rotate the blade so it falls into place on
the shaft.
i@"
Slicing and Shredding
Disc Assembly
1. Place disc stem on tne aower shaft.
Mini Bowl Assembly
1. Place the mini bowl inside the
work bowl over the power shaft.
Rotate the mini bowl until it falls into
place. When properly seated in the
work bowl, the mini bowl cannot
be rotated.
2. Fit the mini blade on the power shaft.
It may be necessary to rotate the blade
until it falls into place.
2,
Fit the disc over the metal pin on the
disc stem with the raised-blade side up.
The disc has a raised nub on the top
and grooves underneath to help align it
properly. Rotate the disc until it falls fully
onto the stem.
3. To remove the mini bowl after
processing, lift the bowl using the
two finger grips located along the top
edge of the bowl.
