Idiomas disponibles
Idiomas disponibles
English
1. Turn OFF the pressure washer unit
OFF switch
9
to the OFF position. Then turn OFF the
water supply.
2. Pull trigger
7
on spray handle
water pressure.
3. Remove the nozzle from the spray wand
the quick connect collar
4. Using the nozzle cleaning tool
from the nozzle.
5. Run water from a faucet or garden hose through
the nozzle.
Storage (Fig. A, B, D, N)
•
STORE INDOORS. Store in a dry, covered location with
above freezing temperatures..
•
Always completely empty water from high pressure hose,
pressure washer unit, nozzles, and spray wand.
•
Nozzles can be stored in the nozzle storage slots on the
handle grip as shown in Fig. A.
•
High pressure hose and suction hose can be stored coiled
up and secured between the cage and the pressure
washer unit
8
as shown in Fig. B.
•
Spray wand can be stored, broken down into three pieces,
in the storage compartment
•
High pressure foam cannon
the built in storage space in the pressure washer unit as
shown in Fig. D, N.
•
Turbo nozzle can be stored in the storage
compartment
30
as shown in Fig. D, N.
•
Pressure washer unit
horizontally, but only stack things on top of unit in the
horizontal storage position as shown in Fig. B
•
The power cord
28
can be stored coiled up on the
power cord storage hook
Accessories
WARNING: Since accessories, other than those offered
by D
WALT, have not been tested with this product, use
e
of such accessories with this tool could be hazardous.
To reduce the risk of injury, use only D
accessories recommended for this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact D
(1‑800‑433‑9258) or visit our website:www.dewalt.com.
10
8
by rotating the ON/
4
to relieve any
2
by pulling
3
toward the spray wand.
27
, unclog any debris
30
as shown in Fig. D, N.
26
can be stored empty, in
8
can be stored vertically or
19
as shown in Fig. B.
WALT
e
WALT call 1‑800‑4‑D
e
e
Repairs
WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement, when
applicable) should be performed by a factory service
center or an authorized service center. Always use
identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer Safety Act.
• Register online at www.dewalt.com.
Three‑Year Limited Warranty
For warranty terms, go to https://www.dewalt.com/
support/warranty.
To request a written copy of the warranty terms, contact:
Customer Service at D
Joppa Road, Towson, MD 21286 or call 1‑800‑4‑D
(1‑800‑433‑9258).
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country‑specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1‑800‑4‑D
(1‑800‑433‑9258) for a free replacement.
WALT
WALT Industrial Tool Co., 701 East
e
WALT
e
WALT
e
