Installation The Microphone Unit - Kenwood KDC-BT838U Manual De Instrucciones

Installation/Removing the Unit

Installation the Microphone Unit

1
Check the installation position of the microphone
(accessory 3).
2
Remove oil and other dirt from the installation
surface.
3
Install the microphone.
4
Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Accessory3
Fix a cable with a commercial
item of tape.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
Adjust the direction of the microphone to the driver.
⁄
• Install the microphone as far as possible from the cell- phone.
38
|
KDC-BT838U