Seat Sling Replacement; Backrest - Sunrise Medical Breezy Ultra 4 Manual De Instrucciones

B REEZ Y UL TRA 4
I. SEAT SLING REPLACEMENT
1. Removal and installation
1. Using a 4mm hex key, remove the eight seat sling screws(A)
2. Exchange the old sling for the new sling.
3. Replace the seat sling screws.
J. BACKREST UPHOLSTERY REPLACEMENT
1. Removal and Installation
1. Using a 4mm hex key, remove the four back upholstery screws(A)
2. Exchange the old upholstery for the new upholstery.
3. Replace the back upholstery screws.
35 36
K. BACKREST
1. Height Adjustment
a. Remove the backrest height adjustment lock knob from both sides of the chair.
b. The Knob is attached to a screw that is inset. Remove the screw from both sides of the chair.
c. There are holes 1 inch apart that you may choose from to set the back height.
d. After selecting the proper height, insert the bolts through backrest tube.
e. Attach the knobs and tighten the hardware.
NOTE– Use a torque setting of 75 in-lbs. when adjusting backrest.
2. Angle Adjustment
a. Using a 5mm hex key, loosen pivot screw(D).
b. Using a 5mm hex key, loosen the adjustment screw(E)
c. There are holes 1 inch apart that you may choose from to set the back angle.
d. Set your backrest angle, and tighten adjustment screw(E) to lock in the adjustment.
e. Tighten the pivot screw(D).
NOTE– Use a torque setting of 75 in-lbs. when adjusting backrest.
MK-100078 RevA
33
34
IX. DEALER SERVICE AND ADJUSTMENT
20
33
34
35
36
D
E