Idiomas disponibles
Idiomas disponibles
Removing the drilling core
Break off the drilling core and remove.
■
Over head drilling
DANGER
When drilling "over" head always secure
the drill stand with the assembly.
DANGER
When drilling "over" head, always use a
water collecting ring and a Würth industrial
wet-type vacuum cleaner!
Mounting the water collecting ring
Attach the mounting brackets 27 on the base
■
plate adjusting screws 23.
Push the water collecting ring 29 between both
■
bracket parts and press it firmly against the mate-
rial to be drilled.
Tighten locking screws 24.
■
Connect a Würth industrial wet-type vacuum
■
cleaner.
Attach a protective cover 28 onto the water col-
■
lecting ring and drill through. Remove the drilled
part of the cover from the core bit.
Transport and Storage
CAUTION
Danger of injury and damage! Pay attention
to the weight of the appliance when trans-
porting it.
Clean the machine and remove the drilling dirt.
■
Transport the machine and core bit separately.
■
Blow out remaining water from hose and machine
■
when it freezes.
This appliance may only be stored inside a
■
building.
Maintenance and Care
NOTE
Always keep the machine and cooling air
vents free and clean.
It must always be kept in a dry, frost-free place.
■
Environmental protection
Do not dispose of this device in house-
hold waste. According to European
Directive 2012/19/EU on waste electri-
cal and electronic equipment and its
implementation in national law, broken
and unserviceable electric tools must be
collected separately and submitted to an
environmentally sound recycling facility. Ensure tha
your used device is returned to your dealer or obtain
information about a local authorised collection and
disposal system. Ignoring this EU directive can have
potential effects on the environment and your health!
Information on noise
Sound pressure level
EN-ISO 11204
DS 350
88 dB (A)
Wear ear protection!
Accessories and spare parts
If. in spite of careful manufacturing and testing pro-
cesses, the device becomes faulty, a repair by Würth
masterService should be arranged.
With any enquiries or spare parts orders, always
quote the article number as given on the name plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.
Guarantee
For this Würth appliance we grant a warranty in
accordance with the statutory/country-specific provi-
sions as from date of purchase (by evidence of invoice
or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is excluded from the warranty.
Claims can be recognized only if the appliance is
presented in a not-disassembled manner to a Würth
branch office, your Würth field service employee or
a customer service office for power tools authorized
by Würth.
Sound power level
EN-ISO 3744
98 dB (A)
15
