Idiomas disponibles
Idiomas disponibles
GB
Please read and comply with these
instructions prior to the initial opera-
tion of your device.
Retain these instruction manual for
future reference or for subsequent pos-
sessors.
In addition, the general safety instructions
in the enclosed booklet must be followed.
Before using for the first time, ask for a
practical demonstration.
Special Safety Instructions
Wear safety goggles and
hearing protection.
Wear light respiratory
protection and a hard hat.
Before carrying out any work on
the device, disconnect it from the
power supply.
Be careful of hidden electrical lines
or gas and water pipes. Check the
working area, e.g., with a metal detector.
Before commencing work, the PRCD protective
■
switch must be checked for proper functioning.
Before commencing work consult the responsi-
■
ble structural engineers, architects or site super-
vision about any planned borings, especially
when cutting through reinforcing steel.
The machine may only be operated using a
■
power supply with protection earthing accord-
ing to the regulations.
The machine may not be operated by persons
■
under the age of 16 years.
The drill stand must always be mounted firmly
■
and must not be able to move during drilling.
For your safety
In case you do not adhere to this instruction manual
and the safety instructions, this may result in dam-
ages on the device and cause dangerous situations
for the operator and other people. In case of trans-
port damage inform vendor immediately.
Safety instructions
Only mount the drill stand on an even, firm and
■
smooth surface using the vacuum pump.
These must be in perfect condition.
When drilling "over" head always secure the
■
drill stand with the assembly.
Prevent the drilling core from falling.
■
Use only original Würth parts and
accessories.
WARNING - Prior to the first
start-up, it is definitely neces-
sary to read the Safety instruc-
tions!
When carrying out
"over" head wet
core drilling, a water
collecting ring and
water suction are
always to be used.
11
