Idiomas disponibles
Idiomas disponibles
Slide Appliance into
Cabinet
7
Adjust Fit of Appliance in
Cabinet
Remove Appliance
The base pan has leveling legs B (see step 4) to adjust the fit of the appliance in the
cabinet. If the Trim Kit is not flush with the cabinet face, adjust as follows:
1. Remove the appliance from the cabinet (see Remove Appliance).
2. Raise/lower the relevant leveling legs to eliminate any gap between Trim Kit and
cabinet face.
3. Re-install the appliance in cabinet and check fit.
4, Repeat process, if necessary.
To remove appliance:
1. Disconnect the electrical cord from the conduit box.
2. Open oven door.
3. Lift appliance at front by 1/9".
4. Pull appliance out of cabinet.
