Motorola DLR1020 Guia Del Usuario página 64

Idiomas disponibles

Idiomas disponibles

MN003596A01-AB
Chapter 12 : Cloning Mode
When in cloning mode, you must have at least two radios. Identify the radios as follow:
A Source radio where the profiles are copied or cloned to another radio
A Target radio where the profiles are cloned from the source radio
The placement for Source Radio in MUC is in pocket 1, 4, 7, or 10.
The placement for Target Radio in MUC is in pocket 2, 5, 8, or 11.
Match the placement for Source and Target radios in MUC as follows:
1 and 2
4 and 5
7 and 8
10 and 11
NOTE: Read MUC pocket numbers from left to right with the Motorola Solutions logo facing
front.
When pairing the Source and Target radio, use the same band type for successful cloning mode.
When cloning, the MUC does not need to be connected to a power source.
Figure 16: Cloning Mode in Multi-Unit Charger
Table 20: Cloning Mode in Multi-Unit Charger
Number
64
2
1
3
7
6
1
2
3
4
5
6
7
8
9
4
5
9
8
Item
Pocket 1
"CLONE" symbol
Pocket 2
Pocket 4
Pocket 5
Pocket 7
Pocket 8
Pocket 10
Pocket 11
loading

Este manual también es adecuado para:

Dlr1060