Idiomas disponibles
Idiomas disponibles
MN003596A01-AB
Chapter 8 : General Radio Operations
For a group of radio to communicate, all the radios need to be on the same channel and have the
same radio PROFILE ID number. The default PROFILE ID number is 0000.
Channel
Current channel that the radio is using, depending on radio model.
PROFILE ID Number
The radio in your fleet, independent of the channels that users are assigned to should use the same
PROFILE ID. Customize the PROFILE ID number to avoid interference from other users using the
default 0000 number. To customize your radio fleet PROFILE ID, choose a four digit number and
enter it using the radio Advanced Configuration Mode. Turn off the radio, press PTT→Volume
Up→Power buttons at the same time, and hold until you hear "Programming Mode" voice prompt
from your radio. For more information, refer to the
8.7
Top Button Options
The Top button is programmed to Private Reply feature by default.
You can configure the Top button to other features such as Page All Available, Call Available, Direct
Call, and Mute. You can disable the top button feature.
For more information on Top button configuration, refer to
8.8
Radio Status
Table 9: Radio Status
Front LED Indica-
Radio Status
tor
Power-Up
Solid red for two
seconds
Power Off
Solid red for two
seconds
Fatal Error at Pow-
Double blink red
er-up
Channel Busy
Not available
Idle Mode
Slow blink red
Transmit (Tx)
Solid red
(standard group
call)
Receive (Rx)
Fast blink red
(standard group
call)
28
Advanced Configuration Mode on page
Advanced Configuration Mode on page
Top Button LED
Indicator
OFF
"Battery Level <Level>, Chan-
nel <Number>"
OFF
Power Off chirps
Single blink or-
Not Available
ange
OFF
Busy tone
OFF
Not Available
OFF
Not Available
OFF
Not Available
46.
Voice Prompt or Tone
46.
