Idiomas disponibles
Idiomas disponibles
6
Installation
Figure 26: Swivel wedge with setting master, raised
ATTENTION!
Check that the swivel wedge is facing the direction of
travel after lifting, and align the holes in the kingpin with
the holes in the weld-in plate.
72
Figure 27: Kingpin screw connections
Insert the supplied screws in the kingpin and tighten the
screws with 190±10 Nm, according to the kingpin installation
and operating instructions.
MUB 007 004 M01 (REV--) 05-2023
ADVICE!
For tightening torques and all the necessary information
on the kingpin, see the installation and operating man-
ual at www.jost-world.com.
