Idiomas disponibles
Idiomas disponibles
„ Install the desired socket.
„ Adjust the forward/reverse dial on the back of the ratchet
head to choose the desired rotation direction of the socket.
„ Hold the tool in front of the workpiece with the socket
over the nut or bolt.
„ Depress the switch trigger and fasten or loosen as desired.
NOTE: After fastening, always check the torque with a
torque wrench.
WARNING:
When servicing, use only identical replacement parts.
Use of any other part could create a hazard or cause
product damage.
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
OPERATION
MAINTENANCE
NOTE: ILLUSTRATIONS START ON PAGE 8
NOTICE:
Manual torque capacity of the ratchet is 50 ft-lbs. Apply-
ing additional force could cause damage to the tool.
When operating in cold weather, the battery pack may need
a warm up period before full operating power of the tool is
reached. Use the tool in a light duty application. After about
a minute, the battery pack will warm up and begin operat-
ing normally.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
7 — English
