WIKA CTD9100-165 Manual De Instrucciones página 9

Temperature Dry Well Calibrators/Micro Calibration Baths
CTD9100/CTB9100
4. Description of the Controls
4.1 Front of the controller
(controller type TLK 32)
Fig. 5: Overview of the controls on the front of the
controller
1 P key
Accessing the default set temperature

Accessing menu items and parameters

Confirming inputs

2  key
Reducing the setting values

Selecting individual menu items

Returning to the previous menu level

3 5 key
Increasing the setting values

Selecting individual menu items

Returning to the previous menu level

4 U key
Retrieving the saved set temperatures (only for

the S version)
5 LED OUT 1
Signals the status of the output for the
temperature control
If the LED OUT 1 lights up, the calibrator/micro

calibration bath is heating
 If the LED OUT 1 does not light up, the calibra-
tor/micro calibration bath is not heating
6 LED OUT 2
a) Heating instrument
Signals the status of the output for the fan
control
If the LED OUT 2 lights up, the fan is running at

high speed
 If the LED OUT 2 does not light up, the fan is
running at low speed
WIKA Operating Instructions Temperature Dry Well Calibrators/Micro Calibration Baths
b) Heating and cooling instrument
Signals the status of the output for the
temperature control
If the LED OUT 1 lights up, the calibrator/micro

calibration bath is cooling
If the LED OUT 1 does not light up, the calibra-

tor/micro calibration bath is not cooling
7 LED OUT 3
This LED has no function here

8 LED OUT 4
This LED has no function here

9 LED SET
When flashing, it signals access to the individual

menu items and parameters
10 LED AT/ST
This LED has no function here

11 PV indicator
 Displays the current reference temperature
Displays the individual modes, menu items and

parameters
12 SV indicator
Displays the set temperature

Displays certain parameters in the individual

modes and menu items
GB
9