Idiomas disponibles
Idiomas disponibles
Temperature Dry Well Calibrators/Micro Calibration Baths
CTD9100/CTB9100
13.4 Heating and cooling periods
13.4.1 CTB9100-165
Measuring conditions:
All heating and cooling periods are related to a
reference Pt100 probe, Ø 6 mm, stainless steel
sheath
The reference sensor is located 5 mm above the
protective basket in the middle of the tank
Distilled water
Heating up:
2 °C to 25 °C
25 °C to 50 °C
50 °C to 75 °C
75 °C to 90 °C
Silicone oil 5 CS
Heating up:
-30 °C to -25 °C
-25 °C to -15 °C
-15 °C to 0 °C
0 °C to 25 °C
25 °C to 50 °C
50 °C to 75 °C
75 °C to 100 °C
100 °C to 120 °C
WIKA Operating Instructions Temperature Dry Well Calibrators/Micro Calibration Baths
Period
5:31 min
6:49 min
8:07 min
6:19 min
Period
0:56 min
1:06 min
1:18 min
2:46 min
2:37 min
3:10 min
4:23 min
5:05 min
All heating and cooling periods do not include
stabilisation time
The measurements were carried out at a room
temperature of approx. 23 °C with bath without
cover
Cooling down:
90 °C to 75 °C
75 °C to 50 °C
50 °C to 25 °C
25 °C to 2 °C
Cooling down:
120 °C to 100 °C
100 °C to 75 °C
75 °C to 50 °C
50 °C to 25 °C
25 °C to 0 °C
0 °C to -15 °C
-15 °C to -25 °C
-25 °C to -30 °C
Period
3:09 min
7:06 min
10:18 min
14:52 min
Period
32:24 min
3:40 min
4:48 min
6:41 min
8:50 min
10:36 min
15:01 min
23:19 min
33
GB
