Dangerous Points; Safety Devices; Use According To The Regulations - Colged TopTech 31-22.1 Manual De Instrucciones

UK
A dangerous point or dangerous area of the machine is an area in which accidents may occur in case of
failure to follow the instructions.

If the conveyor stops during regular functioning, press the line button. Only restart the machine once
the cause of the blockage has been identified and removed.

It is forbidden and very dangerous to access the internal part of the machine from the entrance or exit
of the conveyor when the machine is on and in motion.

It is forbidden and very dangerous to make repairs to the conveying system and to the electric users
when the machine is working.

It is forbidden to use the machine without the surveillance of an operator.

Do not submerge your hands in the water in the tanks.

It is forbidden to access the switch to deactivate or activate the machine with wet hands.

It is absolutely forbidden to access the internal part of the electric box.

On the doors there are magnetic switches that interrupt pre-wash, wash, rinse and basket conveying,
when opened.

Protection against unexpected start-up. If the machine accidentally stops due to lack of electricity, it
will not resume automatically when the power returns.

Thermal protections for electro-pumps and motors, guaranteeing their integrity in case of short-circuit
and overload.

Magneto-thermal protections or fuses for each heating element, protecting elements from the dangers
of short-circuits and overload.

Boiler safety thermostat. In case of malfunctioning of a thermostat for temperature control, a second
safety thermostat will intervene and interrupt the functioning of heating elements.

Safety microswitch on the conveyor. If the conveying stops due to accidental causes, the microswitch
installed near the support of the motor reducer will interrupt the conveying function.

Safety door stop. When the doors are opened, the hooks prevent them from falling if a spring should
break.

Low-voltage commands.

Conveying machines are expressly designed to wash dishes, glasses, cups, flatware and similar items
together with the basket in which they are placed. Any other use is considered to be not in accordance
with the regulations.

It is imperative to respect the manufacturer's safety, use and maintenance regulations.

It is imperative to respect the suitable regulations to prevent accidents, and further acknowledged safety
technique regulations.

The machine must only be used by personnel suitably trained to avoid hazards.

The machine must only be used with original manufacturer's accessories and spare parts.
Page 18 of 33
DISHWASHER INSTRUCTIONS MANUAL

Dangerous points

Use according to the regulations

Safety devices

MDITT31-(r06)