Idiomas disponibles
Idiomas disponibles
Before use
Fitting/changing the saw blade
WARNING!
►
Always remove the plug from the power
socket before working on the appliance .
Otherwise, there is a risk of injury .
♦
Turn the quick-release chuck
stop and hold it in this position .
♦
Push the required saw blade
quick-release chuck
CAUTION!
►
The teeth of the saw blade
downwards!
♦
Let go of the quick-release chuck
returns to its initial position . The saw blade
is now locked .
Turning the appliance handle
RISK OF INJURY!
►
Always remove the plug from the power
socket before working on the appliance . The
handle
can be turned by 90° to the right
or left . This allows the ON/OFF switch
be moved to the most suitable position
depending on the working conditions .
♦
Press the release button
handle
to the right or left .
♦
Allow the handle
■
40
│
GB │ MT
as far as the
into the
as far as the stop .
must point
so that it
and turn the
to engage .
Adjusting the footplate
RISK OF INJURY!
►
Always remove the plug from the power
socket before working on the appliance .
♦
Adjust the footplate
depth .
♦
To do so, undo the locking lever
the footplate
♦
Lock this position by closing the locking lever
Stroke rate selection
Use the adjusting wheel
stroke rate ( — = lower stroke rate, + = increased
stroke rate) .
The stroke rate can also be changed during
operation .
Use
Switching on and off
During operation, you can choose between instan-
taneous and continuous operation .
Switching to instantaneous operation
♦
Press the ON/OFF switch
lights up when the ON/OFF switch
pushed in slightly or fully and illuminates the
working area in low light conditions .
to
Switching off instantaneous operation
♦
Release the ON/OFF switch
Switching to continuous operation
♦
Press the ON/OFF switch
position with the locking switch
Switching off continuous operation
♦
Press the ON/OFF switch
again .
according to the cutting
and move
to the corresponding position .
to select the desired
. The work light
.
and lock it in this
.
and release it
PFS 710 D3
.
is
