Televes QPSK-PAL Manual De Instrucciones página 47

Ocultar thumbs Ver también para QPSK-PAL:
Idiomas disponibles

Idiomas disponibles

User manual
It is very that this cycle functions correctly,
therefore do not:
- Open the side doors, as this would cause
the ventilators to extract the air from the
outside rather than the air in the inside of
the rack.
- Place objects close to the rack that may
block the entry and exit points of the air.
- When the rack is not complete, the
subracks should be placed from the top
all the way down without leaving any
gaps in the middle, fig 5.
fig. 5
47
QPSK-PAL
8.2.- Installation of the rack without ven-
tilation facilities.
When the rack is located in an area where
the temperature is approximately 40°C, it is
advisable to install it in such a way that it is
left totally open, in other words, without
adding the side doors thus facilitating the
ventilation of the units with the option of
placing the blank plates ref. 5073, fig. 6.
fig. 6
loading

Este manual también es adecuado para:

507905