Dashboard And Electronic Control Board - RCM GO Serie Manual De Uso Y Mantenimiento

DASHBOARD AND ELECTRONIC CONTROL BOARD (FIG.12)
"Battery operated machines with drive system".
Multifunction display (1)
The display monitors the hour meter, battery charge (0-100%) with relative percentage bar, fault diagnostics (codes). (see FAULT DIAGNOSTICS)
Suction control button with LED (2)
Function activation is displayed by the LED on the button, the next press on it can switch off the suction motor with a parameter pre-set delay,
during which time the LED fl ashes.
IMPORTANT NOTE: Suction can be disabled by the intervention of the thermal cut-out protector, in this case one must switch off and
restart the machine. The suction function can be reactivated within half a second from the last shutdown.
The exhausted battery level (with parameter pre-set time) disables the suction function
Brush control button with LED (3)
Function activation is displayed by the LED on the button, the same controls the brushes and water electrovalve after a parameter pre-set delay.
Shutdown takes place at the next press of the button with the following timing:
• Electrovalve shutdown.
• Parameter pre-set delay.
• Brush motor shutdown.
IMPORTANT NOTE: The brushes are activated only if the machine is moving, the brushes can be disabled by the intervention of the
thermal cut-out protector, in this case one must switch off and restart the machine.
If the machine is no longer moving and the brush function is active, the electrovalve and brush motor switch off automatically after a
parameter pre-set time.
The exhausted battery level (maintained for a parameter pre-set time) disables the brush function by switching off the motor and water electroval-
ve allowing to complete fl oor drying before the battery has run out completely.
Anomalies LED (4)
The LED fl ashes in the event of machine anomalies (see FAULT DIAGNOSTICS).
Electronic control board "WIKI or "SOLID" (5)
Check the drive system and machine functions.
1 4 2 3
"WIKI"
Fino matricola/Up to serial number/Hasta la matrícula
Jusqu' à au n. Sèrie/Bis Serien-nr./ Tot serienummer/Op til serienummer
(206497 GO 531T)(206741 GO 552T-562T)
"SOLID"
Da matricola/From serial number/Desde la matrícula
À partir du n. Sèrie/Von Serien-Nr./ Van serienummer/Fra serienummer
(206498 GO 531T)(206742 GO 552T-562T)
51
5
5