Idiomas disponibles
Idiomas disponibles
Buttons
Button
Heat-up indicator
When you activate an oven function, the
bars in the display
CLOCK FUNCTIONS
Clock functions table
Clock function
TIME OF DAY
MINUTE MINDER
DURATION
END
Press
again and again to
switch between the clock
functions.
To confirm the settings of the
clock functions, press
5 seconds for an automatic
confirmation.
Setting the DURATION or END
1. Press
again and again until the
display shows
or
flashes in the display.
Function
MINUS
CLOCK
PLUS
come on one by one.
Application
To set, change or check the time of day. Refer to "Setting
the time".
Use to set a countdown time (maximum 23 h 59 min). This
function has no effect on the operation of the appliance.
You can set the MINUTE MINDER at any time, also if the
appliance is off.
To set how long the appliance operates. Use only when an
oven function is set.
To set when the appliance must deactivate. Use only when
an oven function is set. You can use Duration and End at
the same time (time delay), if the appliance is to be activate
and deactivate automatically later.
or wait
or
.
Description
To set the time.
To set a clock function.
To set the time.
The bars show that the oven temperature
increases or decreases.
2. Press
or
press
to confirm.
For Duration
first you set the minutes
and then the hours, for End
the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
time setting flash in the display. The oven
stops.
3. Turn the knob for the oven functions to
the off position.
4. Press any button or open the oven door
to stop the acoustic signal.
Progress 9
to the set the values and
first you set
or
symbol and
