Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Long backwashing interval filters (FT130, FT132, FT134, FT136)
D.I.P. 1
D.I.P. 2
ON
ON
OFF
ON
ON
OFF
OFF
OFF
BravoMATIC filters factory settings:
Short backwashing interval filters (FT030, FT032, FT034, FT036)
D.I.P. 1
D.I.P. 2
ON
ON
Long backwashing interval filters (FT130, FT132, FT134, FT136)
D.I.P. 1
D.I.P. 2
ON
ON
After adjustments, insert the white cover back in its position paying attention to the location of the wiring
cables; screw three screws without tighten. After inserting the plug and feeding the filter it will carry out a test
backwashing; at this point it is working with a new cleaning program set.
Solenoid valve for backwashing
During cleaning operations, 2 pressure bar are necessary so that the BravoMATIC
filters are able to realize effective cleaning cycles. If this condition is not satisfied it is
possible to instal a solenoid closing valve in the outlet connection.
For these applications EVC backwashing solenoid valves (normally open, powered
at 24 Vac) are available, with the following connections:
Using an appropriate electrical panel (it is available, as optional, a control board too, cod. 23022030) it is
possible to manage the opening and closure of the solenoid valve, taking advantage of the BravoMATIC
voltage free contact.
Control board
The control board (cod. 23022030) is fed by a 220-12/24 Vac separate transformer
and it allows the direct control up to two 24 Vac appliances(EVC model solenoid
valves, relay for pumps, alarms, etc.).
It has a specific input for the BravoMATIC voltage free contact. The appliances are
mastered by the control board when the BravoMATIC filter free contact send the signal
(backwashing stage). At the end of the backwashing cycle a signal for the power off of
the devices connected to the control board is sent..
MAN139 Rev.2
BRAVOMATIC - ENGLISH
Washing interval
every 12 hours
every 24 hours
every 36 hours
every 48 hours
Washing interval
Every 2 hours
Washing interval
every 12 hours
CODE
CONNECTIONS
EVC001
¾"
EVC002
1"
EVC003
1" ¼
D.I.P. 3
D.I.P. 4
ON
ON
OFF
ON
ON
OFF
OFF
OFF
D.I.P. 3
D.I.P. 4
ON
ON
D.I.P. 3
D.I.P. 4
ON
ON
CODE
CONNECTIONS
EVC004
1" ½
EVC005
2"
Forewarning time
0 seconds
30 seconds
60 seconds
100 seconds
Forewarning time
0 seconds
Forewarning time
0 seconds
PAG.E-7
Capítulos
Tabla de contenido
Solución de problemas
