Acqua Brevetti BRAVOMATIC FT030 Manual De Instrucciones Para El Uso Y Mantenimiento página 23

BravoMATIC long backwashing interval
Connections
Flow rate (P=0,2 bar)
Flow rate (P=0,5 bar)
Filtration rating*
Washing interval
Min-max water pressure
Min-max water temperature
Power supply
A1.7 Specification for water to be treated
BravoMATIC has been designed and created for the treatment of drinking water.
If the water to be treated is not potable, process water and/or cooling water please refer to Acqua Brevetti
s.r.l. (tel. +39.(0)49.8973432, e-mail: [email protected].)
BravoMATIC cannot be used to filter water containing any kind of chemicals (for example acids, bases,
solvents, detergents, antifreeze, glycols etc.).
A1.8 Usage precautions
Warning! BravoMATIC filter is a device connected to a 220 volt electricity grid.
The plug adapter should be inserted in a standard socket equipped with grounding contact and
protected by a residual current device (circuit breaker). Verify that the adaptor is plugged all the way
into the outlet and placed in a protected area, preserved from accidental contact, water splashing, moisture
and heat sources. For any service disconnect the filter from the power supply.
A1.9 Backwashing circuit and electrical connections (description)
On the back of the filter there are two electrical wires, red/black:
- red/black cable (detail A in fig.): supply cable to be connected to the power supply dedicated pin;
MAN139 Rev.2
BRAVOMATIC - ENGLISH
Units FT130
¾" M
3
m /h 2.0
3
m /h 3.2
micron
ore
bar
°C
V-Hz-VA
B
A
FT132 FT134
1" M 1" ¼ M
2.7 3.0
4.5 5.0
89
12 – 24 – 36 – 48
1.5 - 10
5 – 30
230/18-50-10
FT136
1" ½ M
4.5
6.0
PAG.E-5