Idiomas disponibles
Idiomas disponibles
bled incompletely or not safely or if the starter does not switch the saw on and off. The
chain must stop after pressing the starter.
• We recommend that first-time users are instructed practically as to the correct use of
the chainsaw and the required personal safety equipment by an experienced operator;
the cutting of round wood or logs should be trained on a log stand or similar rack-type
device first.
• Warning! Never use the machine in bad weather, particularly, if there is a risk of lightning!
• Watch out for falling branches. Check the tree to be saw out. Make a room for falling
branches.
• Do not use the pole saw for cutting annual shoots or bushes.
• Working on ladders, scaffoldings or trees is forbidden. Always hold the chainsaw with
both hands while working with it. Apply firm, constant pressure on the chain saw when
cutting. Do not use the pole saw for sawing out branches with a diameter exceeding
the chain bar.
• Keep other persons out of reach of the cutting end of the pole saw – and in a safe
distance from the place of your work.
• Your power tool is not insulated against electric shock. To reduce the risk of electrocu-
tion, never operate this power tool in the vicinity of any wires or cables (power, etc.)
which may be carrying electric current. Electricity can jump from one point to another
by means of arcing. Higher voltage increases the distance electricity can arc. Electricity
can also move through branches, especially if they are wet. Maintain a clearance of at
least 30 feet (10 m) between the pole trimmer (including any branches it is contacting)
and any electrical line carrying live current.
• Do not stand directly under the branch to be cut off. Stand always outside the falling
branches.
GB | Operating Instructions
7
