OGK urban iki Junior Instrucciones Para El Montaje página 3

ENG
How to assemble your Urban Iki Junior seat
The bicycle seat can be mounted on a luggage carrier with a width between
120-175 mm. Please keep in mind that you can only use the Urban Iki Junior seat
on bicycles that are suitable for the heavier loads.
3a
Consult your bicycle manual or ask the manufacturer. If
your bike is technically sound, you can mount your Urban Iki
bicycle seat as follows.
3a
Please note: if you have already fitted a mounting frame on
your luggage carrier for the use of an Urban Iki rear seat,
remove it from the luggage carrier before you start fitting
the Urban Iki Junior seat.
Step 1: Put the footrests up
3a
Step 3: Place the footrests around the rear wheel frame
3b
3b
3b
1
1
1
1. niet volledig aandraaien
2. onderste schroef niet monteren
1. niet volledig aandraaien
1. Do not fully tighten
1. niet volledig aandraaien
Step 4: Place the support bracket on the luggage carrier
4 4
4
3a
instructional video
Step 2: Remove the screws and the
semicircular cover from the footrests
3b
1
1. niet volledig aandraaien
2. onderste schroef niet monteren
2.
ivm beugel
2.
2.
ivm beugel
2. Do not yet install the lower screw due
2. onderste schroef niet monteren
ivm beugel
to the support bracket in step 4.
2. onderste schroef niet monteren
ivm beugel
1. Do not fully
tighten it yet
1 1
1. niet volledig aandraaien 1. niet volledig aandraaien
Step 5: Click the support bracket holder in the mounting frame
Scan for
Step 6: Unscrew the
mounting frame
2.
Step 8: Place the support
bracket in one of the 2 middle
recesses
CLICK!
CLICK!
Step 7: Place the mounting frame on the
luggage rack
Step 9: Click the mounting frame
incl. support bracket holder onto
the support bracket
CLICK!
CLICK!
CLICK!
CLICK!
CLICK!
ENG
CLICK!
CLICK!
CLICK!
5