Idiomas disponibles
Idiomas disponibles
5 Installation
(1)
Ends of the pipe
Symbol for perpendicular
A
5.1.5
Flow direction
The positive flow direction (
The flow direction must be observed when installing the device.
5.1.6
Alignment of the housing for electronic components
The maximum admissible display temperature of 70 °C must not be exceeded.
Appropriate measures must be taken to ensure compliance with the temperature limit.
For this purpose, it can be helpful to install the device rotated by 180°.
16
(X)
//
) is shown on both sides of the device using an arrow.
Insertion length L including pipe adapter
Symbol for parallel
