Nilfisk AERO 21 INOX Instrucciones De Funcionamiento página 14

Ocultar thumbs Ver también para AERO 21 INOX:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 74
ASTA approved to BS 1362 should be fitted.
Never use the plug without the fuse cover fit-
ted. Replacement fuse covers are available at
any electrical retail outlet.
If the available socket outlet is not suitable for the
plug supplied, the plug must be cut off and an ap-
propriate plug fitted. The plug thus cut off MUST BE
DESTROYED for safety reasons before being dis-
posed of.
Machines built for other voltages and frequencies
are not normally supplied with a fitted plug.
If it is necessary to fit a plug, the wires in this power
supply cord are coloured in accordance with the fol-
lowing code:
1.9.3 Blue-neutral brown-live
TO CONNECT THE NEW PLUG:
If using a three-pin plug, do
not make any connection to
the the terminal in the plug
which is marked with the let-
ter 'E' or by the safety earth
symbol or coloured green or
green & yellow.
The blue wire must be connected to the terminal in
the plug which is marked with the letter 'N' or is col-
oured black or blue.
The brown wire which must be connected to the ter-
minal in the plug which is marked with the letter 'L' or
is coloured red or brown.
If the plug to be fitted does not conform to the above
notation then consult a qualified electrician.
2
Risks
2.1
Electrical components
DANGER
The upper section of the vacuum cleaner con-
tains live components.
Contact with live components leads to serious
or even fatal injuries.
Never spray water on to the upper section
of the vacuum cleaner.
DANGER
Electric shock due to faulty mains connecting
lead.
Touching a faulty mains connecting lead can
result in serious or even fatal injuries.
Do not damage the mains power lead
(e.g. by driving over it, pulling or crushing
it).
Regularly check whether the power cord
is damaged or shows signs of ageing.
If the electric cable is damaged, it must be
replaced by an authorized Nilfisk distribu-
tor or similar qualified person in order to
avoid a hazard.
4
In no circumstances should the power
supply cord be wrapped around fingers or
any part of the operators person.
CAUTION
Appliance socket.*
The appliance socket is only designed for the
purposes defined in the operating instructions.
The connection of different appliances can re-
sult in damage.
Prior to plugging in an appliance, always
switch off the vacuum cleaner and the ap-
pliance that is to be connected.
Read the operating instructions to the ap-
pliance to be connected and observe the
safety notes contained in these.
CAUTION
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of
being connected to an unsuitable mains volt-
age.
Ensure that the voltage shown on the rat-
ing plate corresponds to the voltage of the
local mains power supply.
2.2
Picking up liquids
CAUTION
Picking up liquids.
Do not pick up flammable liquids
Before liquids are picked up, always re-
move the filter bag/wastebag and check
that the float or the water level limit works
properly.
The use of a separate filter element or
filter screen is recommended.
If foam appears, stop work immediately
and emty the tank.
2.3
Hazardous materials
WARNING
Hazardous materials.
Vacuuming up hazardous materials can lead
to serious or even fatal injuries
The following materials must not be
picked up by the vacuum cleaner:
hazardous dust
hot materials (burning cigarettes, hot ash,
etc.)
flammable, explosive, aggressive liquids
(e.g. petrol, solvents, acids, alkalis, etc.)
flammable, explosive dust (e.g. magne-
sium or aluminium dust, etc.)
2.4
Spare parts and accessories
CAUTION
Spare parts and accessories.
Optional accessories / Option depending on model
*)
Original instruction
loading

Este manual también es adecuado para:

Aero 21