Idiomas disponibles
Idiomas disponibles
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for making separating cuts and
cut-outs in wood, plastic, metal, ceramic plates and rubber
while resting firmly on the workpiece. It is suitable for
straight and curved cuts with mitre/bevel angles of up to
45°. Note the saw blade recommendations.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Lock-off function for on/off switch
(2) On/off switch
(3) Battery charge indicator
a)
(4) Battery
a)
(5) Battery release button
(6) Extraction outlet
(7) Base plate
(8) Hood for extraction attachment
a)
(9) Base for Cut Control
a)
(10) Saw blade
(11) Viewing window for Cut Control
(12) Guide roller
(13) Shock protection guard
(14) Saw blade receptacle
(15) Handle (insulated gripping surface)
(16) Saw blade storage compartment
a)
(17) Glide shoe
a)
(18) Anti-splinter guard
(19) Guide for parallel guide
a)
(20) Dust extraction adapter
a)
(21) Dust extraction hose
(22) Scale for mitre/bevel angles
(23) Base plate screw
a)
(24) 0° cut mark Cut Control
(25) 45° cut mark Cut Control
(26) Locking screw for parallel guide
(27) Parallel guide with circle cutter
a)
(28) Circle cutter centring tip
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Bosch Power Tools
Technical data
a)
Noise/Vibration Information
a)
Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 82 dB(A); sound power level
93 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
a)
Vibration total values a
determined according to EN 62841‑2‑11:
Cutting boards with saw blade T 144 D:
a
cutting sheet metal with saw blade T 118 A:
a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
a)
The stated vibration level and noise emission value repres-
a)
ent the main applications of the power tool. However, if the
a)
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
Jigsaw
Article number
Stroke rate control
Rated voltage
No-load stroke rate n₀
Stroke
Max. cutting depth
– in wood
– in aluminium
– in steel (unalloyed)
Max. cutting angle (left/right)
Weight according to EPTA-Pro-
A)
cedure 01:2014
Recommended ambient temper-
ature during charging
Permitted ambient temperature
B)
during operation
and during
storage
Recommended rechargeable bat-
teries
Recommended battery char-
C)
gers
A) Depends on battery in use
B) Limited performance at temperatures < 0 °C
C) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
(triax vector sum) and uncertainty K
h
2
2
= 8.5 m/s
, K = 2.5 m/s
,
h,B
2
2
= 10 m/s
, K = 2 m/s
.
h,M
English | 17
EasySaw 18V-70
3 603 K12 0..
●
V=
18
−1
min
2600
mm
20
mm
70
mm
15
mm
6
°
45
kg
1.7 (1.5 Ah)–
2.0 (6 Ah)
°C
0 to +35
°C
–20 to +50
PBA 18V...W-.
AL 18...
1 609 92A 846 | (04.08.2022)
