Finishing Vacuuming Manually; Vacuuming Modes; Selecting The Vacuuming Mode - Miele HS17 Instrucciones De Manejo

en
The robot vacuum cleaner will travel to
the base station and recharge. The
base station contact indicator will go
out.

Finishing vacuuming manually

 Press the Power button on the remo‐
te control.
The robot vacuum cleaner will switch
into standby automatically after approx.
60 seconds. The display will be deacti‐
vated. The battery capacity status indi‐
cator will continue to light up.
You can switch the robot vacuum
cleaner into standby before 60 sec‐
onds is up by pressing the Power but‐
ton again.
The robot vacuum cleaner is reactiva‐
ted by pressing any button on the re‐
mote control or one of the two sensors
in the robot vacuum cleaner display.

Vacuuming modes

There are four different vacuuming
modes.
Auto
Standard vacuuming mode
for normally soiled flooring.
Spot Targeted vacuuming of an
area approx. 1.8 x 1.8 m
around the selected starting
point of the robot vacuum
cleaner.
46
Corner For vacuuming normally
soiled flooring (see Auto).
Additional edge vacuuming
after returning the starting
point.
Turbo
For vacuuming lightly soiled
flooring with a short vac‐
uuming duration.

Selecting the vacuuming mode

 Press the Power button on the remo‐
te control.
There are two ways of selecting the
vacuuming mode.
Option 1 (Remote control)
 Press the button for the vacuuming
mode you want. The corresponding
vacuuming mode symbol will light up
in the display.