Use; Switching On And Off; Starting Vacuuming; Finishing Vacuuming If Vacuuming Started From The Base Station - Miele HS18 Instrucciones De Uso

Use

Always observe the robot vacuum
cleaner during the first cleaning ses-
sion in a new environment and after
making changes in your home. Re-
move any problematic obstacles or
section off the relevant areas with
the magnetic strip or using the con-
troller on a mobile device (see "Con-
nection" – "Defining the area to be
vacuumed"). Check whether steps
and drops in height are recognised
properly.
Your robot vacuum cleaner is equipped
with an integrated WiFi module. You
can view status information or execute
control commands using a mobile
device (tablet PC or smartphone).
If you would like to control the robot va-
cuum cleaner using a mobile device,
please read the "Scout RX app" sec-
tion.
Operation of the robot vacuum cleaner
via remote control and the control field
is described later in this section.

Switching on and off

 Press the Power button on the re-
mote control or any sensor in the
control field.

Starting vacuuming

There are 2 ways to start vacuuming:
Option 1 (Remote control)
 Press the  button.
Option 2 (Control field)
 Press the  sensor.
The area to be vacuumed will be
cleaned.
The robot vacuum cleaner always
cleans for at least 5 minutes, regardless
of the size of the surface to be vacu-
umed.
Finishing vacuuming if vacuuming
started from the base station
The robot vacuum cleaner will return to
the base station and recharge.
If the battery is low, the robot vacuum
cleaner will return to the base station
and recharge. II will appear in the dis-
play. The robot vacuum cleaner will
then carry on vacuuming.
Finishing vacuuming if vacuuming
started from somewhere in the room
The robot vacuum cleaner will return to
its starting point and switch to standby
after approx. 60 seconds.
The robot vacuum cleaner will stand
still when there is low battery capacity.
Charge the robot vacuum cleaner.
en
59