Sony HT-Z9F Manual De Instrucciones página 46

Listening to Sound with
Paired Headphones
1
Set the BLUETOOTH function of
the headphones to on.
2
Press HOME.
The home menu appears on the TV
screen.
3
Select [Setup] - [Advanced
Settings] on the home menu.
4
Select [Bluetooth Settings] -
[Bluetooth Mode] - [Transmitter].
The system enters BLUETOOTH
transmission mode and the system
automatically reconnects to the
headphones that was most recently
connected to.
5
Return to the home menu, select
[Watch] or
select the input.
The image of the selected input
appears on the TV screen, "BT TX"
appears in the front panel display,
then the sound is output from the
headphones.
No sound is output from the
system.
For selecting input, see "Watching
Images" (page 34) or "Listening to
Music/Sound" (page 36).
6
Adjust the volume.
Adjust the volume level of the
headphones. You can also adjust
volume level of the headphones
with  +/– on the remote control.
46
US
[Listen], and
To disconnect the headphones
Perform any of the following items.
– Disable the BLUETOOTH function on
the headphones.
– Set [Bluetooth Mode] to [Receiver] or
[Off] (page 62).
– Turn off the system or headphones.
– Select the device name of the
connected headphones from
[Setup] - [Advanced Settings] -
[Bluetooth Settings] - [Device List].
[Connected] of the device name
disappears.
About the Connection of the
Headphones
• You may not be able to adjust the
volume level depending on the
BLUETOOTH compatible headphones.
• Input of BLUETOOTH is disabled when
[Bluetooth Mode] is set to [Off] or
[Transmitter].
• You can register up to 9 BLUETOOTH
devices. If a 10th BLUETOOTH device is
registered, the oldest connected
BLUETOOTH device will be overwritten
by the new one.
• The system can display up to 15
detected BLUETOOTH devices in the
[Device List].
• You cannot change the sound effect
or settings while transmitting sound to
the BLUETOOTH compatible
headphones.
• Some content may not be output due
to content protection.
• Playback of audio/music on the
BLUETOOTH device is delayed
compared to that on the main unit due
to the characteristics of BLUETOOTH
wireless technology.
• You can enable or disable the
reception of LDAC audio from the
BLUETOOTH device (page 63).