Braun Sensian 4 Guía Rápida página 6

Idiomas disponibles

Idiomas disponibles

How to change temperature between ºF and ºC
1 .
The device is powered off .
2 . Press and hold the speaker button,
, for 4 seconds, while the device is
off . The display will switch between
°F and °C .
3 . Select which scale you want by pressing the speaker
button again,
, for 3 seconds . The display will stop
toggling between º F and º C and will remain on
the scale you selected .
4 . `After 3 seconds, the device will automatically turn off .
5 . The selected scale will be displayed upon the next
start up of the device .
How to change between sound and silent mode
To activate the silent mode, press the 'sound mode' button .
The speaker icon will change to a muted speaker icon on the
LCD screen . The muted speaker icon indicates the
thermometer is in silent mode .
To turn off silent mode press the 'sound
mode' button . The muted speaker icon will
change to the regular speaker icon .
8
Viewing additional memories
At any time while not taking a measurement, the last 10
human temperature readings can be viewed .
While holding down the 'sound mode' button, press the
'surface mode' button to cycle through previous readings .
Each time the 'food/bath mode' button is pressed a previous
temperature is shown .
When the 'sound mode' button and the 'surface mode' button
are both released, the display will default to ready mode for
human temperature .
Errors and troubleshooting
Error message
Situation
When the battery is running
low, the display flashes the
low battery warning symbol;
however, the device can still
work until the battery life has
0% left .
If the steady battery icon is
the only symbol shown on
the display, the device cannot
work . The battery should be
replaced immediately .
When in human body
temperature mode, this
message displays when the
measured temperature is
lower than 93 .2 °F or higher
than 109 .4 °F in or when the
room temperature
is outside the operating range
of 59 °F- 104 °F or 15 °C- 40 °C .
When in surface mode (non-
medical use), this message
displays when the measured
temperature is lower than 32
°F or higher than 212 °F, or
when the room temperature is
outside the operating range of
59 °F-104 °F or 15 °C- 40 °C .
English
Solution
Replace batteries .
Replace batteries .
Re-measure the
temperature, carefully
following the
instructions in "How to
use" section .
Re-measure the
temperature, carefully
following the
instructions in "How
to measure food and
liquid temperature"
section .
9
loading

Este manual también es adecuado para:

Bnt100