Idiomas disponibles
Idiomas disponibles
CLUTCH
Clutch adjustment may be required if the
motorcycle stalls when shifting into gear or
tends to creep; or if the clutch slips, causing
acceleration to lag behind engine speed.
Minor adjustments can be made with the
clutch cable adjuster at the clutch lever (1).
Normal clutch lever freeplay is:
10—20 mm (0.4—0.8 in)
(1)
(1) Clutch lever
1. Pull back the rubber dust cover (2).
2. Loosen the lock nut (3) and turn the
clutch cable upper adjuster (4). Tighten
the lock nut and check the adjustment.
3. If the adjuster is threaded out near its
limit or if the correct freeplay cannot be
obtained, loosen the lock nut and turn in
the clutch cable upper adjuster
completely. Tighten the lock nut and
install the rubber dust cover.
(B)
(3)
(2) Rubber dust cover
(3) Lock nut
(4) Upper adjuster
(2)
(4)
(A)
(A) Increase freeplay
(B) Decrease freeplay
17
