Home Decorators Collection 56237 Guía De Uso Y Mantenimiento página 7

Assembly - Standard Ceiling Mount
1
Preparing for mounting
□
Remove the canopy ring (HH) from the canopy (C) by
turning the ring clockwise until it unlocks.
□
Remove the mounting bracket (A) from the canopy (C)
by loosening the two canopy screws (II) located in the "L
shaped" slots.
□
Remove and save the two canopy screws (SS) in the
round holes. This will enable you to remove the mounting
bracket (A).
2
Routing the wires
NOTE: The fan comes with 18 in. lead wires for use with
the provided 12 in. ball/downrod assembly (B). If you
wish to use a longer downrod, attach the lead wire (Q) to
the fan by connecting the molded adaptor plugs from the
extension wires to the adaptor plugs from the fan.
□
Route the wires exiting the top of the fan motor assembly (E)
through the center of the canopy ring (HH). Make sure the
slots on the canopy ring (HH) are on top.
□
Insert the ball/downrod assembly (B) through the canopy (C)
and slide the decorative motor collar cover (D) onto the end
of the ball/downrod assembly (B). Make sure the slots on the
canopy (C) are on top.
□
Route the wires exiting the top of the fan motor assembly (E)
through the downrod (B) as shown.
II
7
Please contact 1-800-986-3460 for further assistance.
A
C
HH
C
HH
D
B
E
HOMEDEPOT.COM/HOMEDECORATORS
SS