Home Decorators Collection 56237 Guía De Uso Y Mantenimiento página 13

Assembly - Attaching the Fan Blades and Decorative Frame
4
Attaching the decorative bar and
frame part to the center band
NOTE: Place the center band and the blade assemblies on
flat surface to avoid scratches or damage to the fan.
□
Attaching the decorative bar assemblies to the center band,
by aligning the two holes of the bottom of center band and
the decorative bar.
□
Secure the decorative frame assemblies to the center band
using the decorative frame screws (EE).
□
Do not completely tighten these screws. The assemblies
should be slightly loose when attaching the decorative
frames.
□
Repeat this process for the remaining decorative bars and
frame parts.
5
Complete the decorative
frame installation
□
Flip the center band assemblies with blades over and complete
the decorative frame installation.
□
Attach the decorative frame piece (J) to the blades by aligning
the four posts of the decorative frame with the four holes in the
blade and decorative frame with connected part (I).
□
Secure the decorative frame to the blade using the decorative
frame screws (FF). Insert the decorative frame screws (FF)
through the four holes in the blade and decorative frame
with connected part (I) and screw them into the posts of the
decorative frame (J).
□
Make sure all screws are completely tightened.
□
Repeat this process for the remaining decorative frame pieces
(J).
□
Once all of the decorative frame pieces are installed, completely
tighten all of the blade arm screws (EE) and decorative frame
screws (FF) to secure the blade assemblies to the fan.
EE
J
13
Please contact 1-800-986-3460 for further assistance.
I
K
L
F
I
FF
G
HOMEDEPOT.COM/HOMEDECORATORS