Home Decorators Collection 56237 Guía De Uso Y Mantenimiento página 14

Assembly - Attaching the Center Band Assembly
1
Attaching the center band assembly to
the fan motor assembly
NOTE: If the fan is too heavy to lift on a ladder, seek the
assistance of a second person to hang the fan.
□
Carefully lift the center band assembly to the fan motor
assembly.
□
Turn the center band assembly clockwise until it is seated
with the tab of top of motor assembly and align the screw
holes of center band and motor assembly.
□
Insert the center band screw (GG) to the holes of center band
and motor assembly, then secure each screw.
Assembly - Attaching the Bottom Plate
1
Attaching the bottom plate
□
Remove three screw (MM) from the black bracket below the
fan motor assembly (E).
□
Push the bottom plate (M) up to the fan motor assembly (E).
□
Re-install the screw (MM) that was removed in the first step.
Make sure all the screws are firmly tightened.
□
Screw the bottom plate nut (N) onto the bottom plate (M) at
the base of the fan until tight.
F
GG
14
T ab on motor assembly
E
M
MM
N